With the availability of GPUs improving, it’s important not to overlook the potential of chip-based miners. In today’s review, we’ll be evaluating the Jasminer X4-1U, a high-performance ASIC miner that promises to deliver impressive results in terms of both hash rate and energy efficiency. Let’s dive in and see if it lives up to its claims.
Table of Contents
Jasminer X4-1U Overview
The Jasminer X4-1U is a high-performance ASIC (Application-Specific Integrated Circuit) miner designed specifically for Ethereum Classic (ETC) mining. With its compact form factor and powerful capabilities, the Jasminer X4-1U aims to deliver exceptional performance and efficiency in the mining industry. Its compact form factor is a departure from traditional bulky mining rigs, making it a space-saving solution for miners.
Jasminer X4-1U Specifications
The Jasminer X4-1U boasts the following specifications:
- Dimensions: 482.2 x 450 x 44.5 mm
- Power Consumption: 240W ± 10%
- Hash Rate: 520M ± 10%
These Jasminer X4-1U specifications indicate a compact yet powerful mining machine that holds the potential for efficient and profitable ETC mining.
Jasminer X4-1U Key Features
- Compact Design: The X4-1U is built with a compact form factor, allowing miners to optimize space and maximize mining operations in constrained environments.
- Hash Rate: The X4-1U offers a remarkable hash rate of 520M ± 10%, enabling miners to process a significant number of mining calculations per second, resulting in faster block validation and increased mining rewards.
- Power Efficiency: With a power consumption of 240W ± 10%, the X4-1U demonstrates impressive energy efficiency, helping miners reduce electricity costs while maximizing profitability.
- Easy Setup and Configuration: Setting up the X4-1U is straightforward, thanks to its user-friendly interface and detailed documentation. Miners can quickly connect the device, configure mining pool information, and start mining operations efficiently.
- Firmware Upgradeability: The X4-1U supports firmware upgrades, allowing miners to enhance the performance, stability, and security of their mining rigs. Regular firmware updates can optimize mining processes and ensure compatibility with the latest industry standards.
- Stable Performance: The X4-1U is designed to deliver consistent and reliable performance, minimizing downtime and maximizing mining efficiency. Its robust hardware components and efficient cooling system help maintain optimal performance over extended mining periods.
- Compatibility and Support: The X4-1U is specifically tailored for ETC mining, ensuring compatibility with ETC mining software and networks. The manufacturer also provides comprehensive customer support to assist miners with any technical issues or inquiries they may have.
Setup and Configuration
Setting up the Jasminer X4-1U was a straightforward process. After connecting the unit to the network and powering it on, the indicator lights illuminated, indicating its readiness. To configure the miner, we scanned the QR code in the user manual, granting us access to a video tutorial on how to proceed. By accessing the miner’s IP address via a web browser, we entered the configuration interface using the default username and password (root).
Within the intuitive and clean interface, we navigated to the “miner” menu to configure our mining pool information. The interface, although lacking a Chinese language option, was simple enough to navigate, even for those with limited English proficiency. After inputting the necessary information, we updated the configuration.
For optimal performance, we recommend downloading the latest firmware from the official website (https://www.jasminer.com/firmware) or our firmware page. Once downloaded, the firmware can be easily uploaded via the “Upgrade” menu. Updating the firmware not only streamlines the initialization process but also enhances overall performance.
Performance and Efficiency
We conducted extensive tests to evaluate the performance of the Jasminer X4-1U under standard and high-frequency settings.
Under standard frequency settings, the miner maintained a steady 24-hour average hash rate of 502M. The intake and exhaust temperatures were recorded at 28.3°C and 36.3°C, respectively. The noise level was measured at 69.4 dB, while power consumption averaged 254W.
Switching to high-frequency mode, we observed an increase in the average hash rate to 579M over a 24-hour period. The intake temperature dropped slightly to 26.9°C, while the exhaust temperature rose to 39.7°C. The noise level increased to 83.5 dB, and power consumption averaged 300.7W.
Comparing the Official Specifications and Test Results:
- Official Specifications:
- Hash Rate: 520M
- Power Consumption: 240W
- Noise Level: 65 dB
- Low-Frequency Test Results:
- Hash Rate: 502M
- Power Consumption: 254W
- Noise Level: 69.4 dB
- High-Frequency Test Results:
- Hash Rate: 579M
- Power Consumption: 300.7W
- Noise Level: 83.5 dB
Despite slightly higher power consumption in high-frequency mode compared to the official specifications, the Jasminer X4-1U’s exceptional hash rate performance is likely to outweigh this minor drawback. However, it’s worth noting that the noise level may be a concern for those seeking a quiet mining setup. The impact of ambient temperatures on both noise level and power consumption should also be taken into account. Overall, the Jasminer X4-1U proves to be a powerful and efficient mining solution.
Jasminer X4-1U Pros and Cons
Pros of the Jasminer X4-1U:
- High Performance: The Jasminer X4-1U delivers a remarkable hash rate of 520M ± 10%, allowing miners to process a significant number of mining calculations per second, resulting in faster block validation and increased mining rewards.
- Power Efficiency: With a power consumption of 240W ± 10%, the X4-1U demonstrates impressive energy efficiency, helping miners reduce electricity costs and maximize profitability.
- Compact Design: The X4-1U’s compact form factor allows miners to optimize space and maximize mining operations, making it suitable for constrained environments or mining farms with limited space.
- Easy Setup and Configuration: The X4-1U features a user-friendly interface and detailed documentation, making it easy for miners to set up the device, configure mining pool information, and start mining operations efficiently.
- Firmware Upgradeability: The X4-1U supports firmware upgrades, enabling miners to enhance performance, stability, and security through regular updates. This ensures compatibility with the latest industry standards and optimizations.
Cons of the Jasminer X4-1U:
- Moderate Noise Levels: While the X4-1U operates within reasonable noise levels, it may not be classified as a completely silent mining machine. Miners operating in noise-sensitive environments should consider additional noise reduction measures.
- Limited Cryptocurrency Support: The Jasminer X4-1U is specifically designed for Ethereum Classic (ETC) mining. Miners interested in mining other cryptocurrencies may need to consider alternative ASIC miners or dual-mining setups.
- Lack of Multilingual Support: The X4-1U’s interface currently lacks comprehensive multilingual support, which could pose a slight challenge for miners with limited English proficiency. However, the straightforward setup process and available documentation help mitigate this issue.
Real-World Performance and User Feedback
Feedback from early adopters and the ETC mining community has been overwhelmingly positive. Miners have reported increased profitability and satisfaction with the Jasminer X4-1U’s performance. The compact design and efficient operation have made it a preferred choice for many mining enthusiasts.
The Jasminer X4-1U ASIC miner showcases impressive power and efficiency in ETC mining. Its compact form factor, ease of setup, and strong performance make it a standout choice for miners seeking to optimize their operations. While the noise level may be a consideration for some, the overall product quality and performance make the Jasminer X4-1U a highly recommended option for efficient ETC mining.